Ereada Brown and Gemstone Mini Mat Controller Q2000NP with NP function

This controller allows adjusting the heat on the controller from 68°F or 20°C to 158°F or 70°C with a step of one degree Celsius. 

It is OK for the controller to warm up when the mat is heating and the NP (Negative Potential) function is activated. 

We recommended using the NP function of mini mats only on low heat settings or without heat at all. 

If you would like to use both NP and FIR heat, you can also do it sequentially. Start with NP 30 minutes procedure, and after this, switch your mat into heating mode.

Level 1 is 86°F or 30°C ( used for Negative Ions and Potential, all-night sleep low heat mode ) 
Level 2 is 98°F or 36°C ( Low mode ) 
Level 3 is 110°F or 43°C ( Low, medium mode ) 
Level 4 is 120F or 49C ( Medium mode ) 
Level 5 is 133°F or 56°C ( Medium-High mode ) 
Level 6 is 145°F or 63°C ( High mode ) 
Level 7 is 158°F or 70°C ( Highest mode )
  • Negative Potential is activated by the "Negative Ion" or "NP" button for 30 minutes. 
  • If you would like to use NP continuously, you need to manually reactivate this function by pressing the appropriate button again when it stops. But it is not recommended to use NP continuously for more than 30 minutes during the use of heating function at higher than 2nd heat level.
You can use the mat in several modes all together or each separately:
  1. Only Heat/FIR Crystal Rays and Negative Ions
  2. Negative Potential (NP)
  3. Combination of Negative Ions, Negative Potential and Far Infrared Crystal Light together
If you are falling asleep, the best way to use it is to choose 1-2 low FIR Heat levels before going to bed. 
If you feel that 8 hours is too much, please use an external timer. A heavy-duty one with a built-in surge protector may be the right choice for double protection in the nighttime. 
Please, find more information on our Youtube channel:

Still need help? Contact Us Contact Us