Purple Ereada Mini Mat

In addition to deep crystal FIR heat and Negative Ions, it also produces Static Magnetic Fields and Red Light Photons. It is a great reason for regular using the mat to relax and reenergize even without heating. 

UNBOXING
The Mat set Includes:
  1. Ereada Amethyst Mat 
  2. Controller with terminal and plug wires
  3. Waterproof but FIR and Ions Permeable Thick Protector Pad (non-washable) and Thin Waterproof protector (washable)  for use on top of your Mat
  4. Bag for storage and carrying the mat
  5. Owner's Guide

CONTROLLER
The mat has 7 levels of heat on the controller. 

Level 1 is 86°F or 30°C ( used for Negative Ions and Potential, all-night sleep low heat mode )
Level 2 is 98°F or 36°C ( Low mode )
Level 3 is 110°F or 43°C ( Low, medium mode )
Level 4 is 120F or 49C ( Medium mode )
Level 5 is 133°F or 56°C ( Medium-High mode )
Level 6 is 145°F or 63°C ( High mode )
Level 7 is 158°F or 70°C ( Highest mode )

When you receive your item, please take a moment to verify that it was not damaged in transit. Carefully unpack the box and check if everything is included and in due condition. If you discover that anything was not included in the set, or there is any other reason you wouldn't rate this as a 5-star experience, please contact us right away to resolve the issue as fast as possible.
Red Light is activated by the Photon button for 1 hour every 4 hours, so during 8 hours, you have 2 cycles of 1 hour each. It is quite enough for stimulation. After one hour red light will switch itself off. In 4 hours, it will resume. In 1 more hour, it will switch off again.
You can also manually deactivate the Photon function any time, and in this case, cycling will be interrupted. Or you can re-activate it, and the lights will be ON.
You can use the mat in 3 modes:
  • Only Red Light
  • Only Heat / FIR
  • Both Red Light and Far Infrared Light together
If you are falling asleep, the best way to use it is to turn off the Photon function (so it does not wake you up when the Red Light resumes in 4 hours). But most important is to choose 1-2 low levels of FIR heat before going to bed. 
If you feel that 8 hours is too much, an external timer can be used. This heavy-duty one with a built-in surge protector may be a good choice. 

You can also find out more information about the FIR heat, PEMF, and Photon lights in the PUBMED search results  https://www.ncbi.nlm.nih.gov/pmc

PUBMED is a truly unique free educational resource that is developed and maintained by the National Center for Biotechnology Information (NCBI), the U.S. National Library of Medicine (NLM), and the National Institutes of Health (NIH).  

Still need help? Contact Us Contact Us